14k Gold 3 Bead Cluster Threaded End
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Discontinued 14k Gold 3 Bead Cluster Threaded End
LAST CHANCE
Qty
Sold as a SINGLE
$ USD

The Internally threaded ends are made to be worn in only certain internally threaded posts. For internally threaded ends, we can guarantee that the end will work with these posts only.

  • Small measures approximately 2.3mm tall by 2.3mm wide
  • Large measures approximately 3.2mm tall by 3.2mm wide
  • Made of solid 14K gold with an implant grade titanium internally threaded post
  • These threaded ends are made to be worn in only certain internally threaded
    post. For these ends, we can guarantee that the end will work with these posts only.
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
Customer Photos
Similar Products
Customers Also Bought
Customer Reviews (5)
5 Posted on 7/21/2022    by Ana
Verified purchase 18g/16g  Yellow Gold - Large
They're tiny (did anyone mention that they're tiny? I got "large" size) and I need help putting it in my tragus, but once it's in it's gorgeous, and I wouldn't want it any bigger (it's about the size as my 3mm studs, a tiny bit bigger). Great quality.
Was this review helpful to you?
0 Posted on 3/8/2016    by Carolyn
Verified purchase 18g/16g  White Gold - Small
Tiny but not impossible to put in. However the threading length between the two I ordered was significantly different. One worked fine with my current Anatometal post, the other did not (it is about 1/8" longer). This is typical of Body Gems threading though--so be aware. I've ordered an IS post from elsewhere and hopefully it won't be too long for that as well.
Was this review helpful to you?
0 Posted on 8/26/2015    by Christina
Verified purchase 14g/12g  Yellow Gold - Small
I was incredibly disappointed in these. I did as much research as I could looking up pictures beforehand, however once they arrived they are so, so, so incredibly tiny. If you put all three balls together they would still wouldn't be as large as a "regular" sized ball end. Due to this, I haven't worn them once. They just don't have the effect and just don't look right or "luxe" being so small (which I would have gladly paid more for a larger size despite the value (including labor) being so far off the actual current gold spot). Pretty disappointed and would not purchase again.
Was this review helpful to you?
0 Posted on 6/1/2015    by Nick
Verified purchase 18g/16g  Yellow Gold - Small
Great quality, but extremely hard to screw onto posts since they are so small
Was this review helpful to you?
0 Posted on 4/8/2015    by Tori
Verified purchase 18g/16g  Yellow Gold - Small
These are really, REALLY tiny. They're even more difficult to work with than the 4 bead, but tweezers help. They fit into my Anatometal labrets, though one had a flaw in the threading so it's not perfectly flush.
BAF comment: Anatometal threading is short, so their labret accommodate for short threading. Other companies threaded ends have longer threading, so it doesn't threaded all the way down.
Was this review helpful to you?
Customer Questions & Answers

Don't see the answer you're looking for? Please log-in to post your question