Gold Coated Clicker Ring
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Gold Coated Clicker Ring
(4.7)
Qty
Sold as a SINGLE
$ USD
50+ customers have this in their cart
Made from 316L steel PVD coated with 24k gold, the smoldering metallic gleam of these clickers bring the elegance and flash of gold at an affordable price.

More clickers are available here.

Clickers 8g and over can be difficult to open due to the gauge size. We recommend using tools to assist with opening and closing.

This manufacturer is in the process of redesigning the closure for this clicker, for sizes 6g and 4g, and our stock is currently mixed.  The older design will have a centered pin on the hinged section as shown in the picture above, and the new clicker design will have a top-set snap feature, shown in the image for our Cobalt Chrome clicker listing.

In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
12g 1/4" - $17.95
10g 5/16" - $22.95
8g 5/16" - $27.95
Customer Photos
Similar Products
Customers Also Bought
Customer Reviews (111)
4.7 out of 5 stars
81% (122)
12% (18)
3% (5)
3% (5)
1% (1)
5 Posted on 1/11/2023    by Melissa
Verified purchase 18g  7mm
Simple and cute! I love how snug it fits on my lobe.
Was this review helpful to you?
5 Posted on 11/16/2022    by Joel
Verified purchase 6g 5/16" - New Clasps
Beautiful Finish & Super Smooth!!! Previously ordered the cobalt chrome version and this one has the same click style closure. Slight gap at the hinge back side on the outer circumference of the ring...hardly even noticeable!!! As I have this in my septum, it is nice & snug!!! ...no movement to cause tickle!!!🤭...perhaps a little bit tight & irritated from putting in due to the edges around the snap closure point. Had another 6g cbr ring that I inserted to stretch a little before inserting this one. No biggie!!! This ring for some reason is easiest to insert first the hinged part that has the snap nubbie on it...perhaps because it helps guide it through better!!! All in all, a Beautiful little addition to the septum collection!!!...and as I write this, it's even becoming more comfortable to wear!!!😁👍🏻 Interestingly, the breathing through my nostrils doesn't seem to be quite as "obstructed" as it was with the slightly larger 10mm inside diameter ring. Absolute Win Overall!!!😁👍🏻
Was this review helpful to you?
2 Posted on 11/15/2022    by Meridian
Verified purchase 6g 5/16" - New Clasps
I do not like the new clasps as septum jewelry (i find the edges sharp, the gap irritating, and very difficult to open with my hands) i reached out to customer service though and they were helpful. In a lobe piercing it could be better but would recommend ring openers
Was this review helpful to you?
5 Posted on 9/13/2022    by cassandra
Verified purchase 12g 1/4" 
Great quality
Was this review helpful to you?
5 Posted on 8/5/2022
Verified purchase 6g 5/16" - New Clasps
I'm very pleased with this 6G Clicker, which I have purchased in smaller gauges. Sizing up wasn't a "laugh attack", but it was worth the effort.
Was this review helpful to you?
Customer Questions & Answers

Don't see the answer you're looking for? Please log-in to post your question