Current Filters
More Filters:
Most Popular
Body Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Limited Hybrid Deluxe Dichroic Ovoid Weights
LIMITED
  • Product # 23870
  • Material(s): Glass
  • Worn In: Ear lobe
  • Sizes offered: 1/2"
  • Brand:
  • View more products by this brand
These gorgeous ovoid weights from Gorilla Glass are expertly hand crafted and feature their classic sparkly dichro, in an array of bright colors.

Small Hybrid Ovoids have the following approximate measurements:

  • Each weight is 1-1/2" tall x 1" wide, and weighs 17 grams.
  • The inner diameter measures 10mm and the insertion gap is about 4mm.
  • The wearable area is oval and measures 8.2mm tall x 11mm wide.
  • The dichroic design is on both sides.
  • Gorilla Glass recommends these for 1/2" or larger lobes.

The Large Hybrid Ovoids have the following approximate measurements:

  • Each weight is 2-1/2" tall x 1-3/4" wide, and one weighs 68 grams while the other weighs 69 grams
  • The inner diameter measures 13mm and the insertion gap is about 4mm.
  • The wearable area is oval and measures 13.5mm tall x 14.75mm wide.
  • Gorilla Glass recommends these for 5/8" or larger lobes.
THIS IS A LIMITED ITEM! Limited jewelry is usually re-stocked much less frequently and is harder for us to get from the manufacturer. So get it while you can, while it's available!
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard "earring" is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. A big part of this is that some jewelry is made overseas and measured in millimeters. And in the USA jewelry is measured in inches/gauges. So many times jewelry can be anywhere from .5mm to 1mm different.

CONVERSION CHART:
Gauge Millimeter Inch
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
8g 3.2mm 1/8"
6g 4mm 5/32"
4g 5mm 3/16"
2g 6mm 1/4"
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
  26.9mm 1-1/16"
  28.5mm 1-1/8"
  30.1mm 1-3/16"
  31.7mm 1-1/4"
  33.3mm 1-5/16"
  34.9mm 1-3/8"
  36.5mm 1-7/16"
  38.1mm 1-1/2"
  39.6mm 1-9/16"
  41.2mm 1-5/8"
  44.4mm 1-3/4"
  47.6mm 1-7/8"
  51mm 2"
Enlarged example of 1" on ruler
Ruler example