The Legacy Threadless Ends Collection

Account

Limited The Legacy Threadless Ends Collection

Product # 29935
Material(s): Metal, 316L Stainless Steel, Solid Rose gold, 14K gold, Solid Yellow gold, Genuine gemstones, Solid White gold
Threadless
Sizes offered: Threadless
Brand:

These beautiful, original Tawapa designs combine genuine gemstones and carefully cast gold with a beaded and grooved surface.

Threadless ends will fit most of these posts.

The threadless end in this collection are available in 14K yellow, rose, or white gold, as well as sterling silver, and yellow and rose gold plated silver. All ends have a stainless steel pin. Ends with gems will include the gem color in the drop down description.

The below measurements are approximate:

The Micro Lotus end measures 5mm in diameter
The Frozen end measures 6.5mm in diameter
The Afghan Ring end measures 7mm in outer diameter
The Altar end measures 3/8" tall and 1/4" wide
The Large Afghan end measures 10mm in diameter32886
The Small Lotus Drop ends measure 8mm in diameter
The large Lotus Drop ends measure 9.5mm in diameter
The Gemmed Micro Afghan end measures 6.8mm in diameter and is set with 3mm gemstones
The Gemmed Micro Lotus end measures 7mm in diameter and is set with 3mm gemstones
The Gemmed Afghan end measures 7mm in diameter and is set with 3mm gemstones
The Gemmed Lotus end measures 8mm in diameter and is set with 2mm gemstones

More threadless jewelry can be found here.

THIS IS A LIMITED ITEM! Limited jewelry is usually re-stocked much less frequently and is harder for us to get from the manufacturer. So get it while you can, while it's available!

In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:

Gauge	Millimeter	Inch
20g	.81mm
18g	1mm
16g	1.2mm	3/64"
14g	1.6mm	1/16"
12g	2mm	5/64"
10g	2.4mm	3/32"
9g	2.7mm
8g	3.2mm	1/8"
7g	3.5mm
6g	4mm	5/32"
4g	5mm	3/16"
5g	4.5mm
2g	6mm	1/4"
1g	7mm
0g	8mm	5/16"
00g	9mm to 10mm	3/8"
	11mm	7/16"
	13mm	1/2"
	14mm	9/16"
	16mm	5/8"
	19mm	3/4"
	22mm	7/8"
	25mm	1"
Show sizes above 1 inch
	26.9mm	1-1/16"
	28.5mm	1-1/8"
	30.1mm	1-3/16"
	31.7mm	1-1/4"
	33.3mm	1-5/16"
	34.9mm	1-3/8"
	36.5mm	1-7/16"
	38.1mm	1-1/2"
	39.6mm	1-9/16"
	41.2mm	1-5/8"
	44.4mm	1-3/4"
	47.6mm	1-7/8"
	51mm	2"

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:

Captive bead rings - These use tension to hold a bead in place.
Clickers - These use a hinge to open and close the ring.
Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
Seamless rings - These rings require bending to open & close.

How to measure rings

Gauge - This is the thickness of the ring itself.
Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.

How to measure straight barbells

Gauge - This is the thickness of the post/bar itself.
Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.

How to measure double flare plugs

Gauge - Measure the size of the plug across the middle.
Wearable area - Measure straight across the side of the plug between where the flares start.
Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.

How to measure single flare plugs

Gauge - Measure the size of the plug across the middle.
Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.

How to measure no flare plugs

Gauge - Measure the size of the plug across the middle.
Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes

How to measure teardrop shaped jewelry

Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
Wearable area - Measure directly across the plug between where the flares begin.
Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.

How to measure curved barbells

Gauge - This is the thickness of the post/bar itself.
Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.

How to measure circular barbells

Gauge - This is the thickness of the post itself.
Diameter/Length - Measure directly across the inside center of the circular.

JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless

SIZE COMPARISON GUIDES

Enlarged example of 1" on ruler

Customer Photos

Customers Also Bought

14k Gold Breezy Threadless Ends

14K Gold Maya Septum Clicker Rings

14K Gold Maya Septum Seamless Ring Designs

14k Gold Dani Threadless Ends

Titanium Threadless Labret Post

Customer Reviews (10)

4.9 out of 5 stars

86% (12)

7% (1)