Current Filters
More Filters:
Most Popular
Body Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Limited Replacement Screws for Tribal Dream Ring
LIMITED
Qty
Sold as a SINGLE
$ USD
Screw for the Steel Basicline® Tribal Dream Ring is lost? No problem, we have what you are looking for!

The Dream Ring Screw is available in various thicknesses and lengths.

The 2.5 mm thickness x 6 mm length screw will fit the following Tribal Dream Ring:

  • 0g (8mm) thickness x 10 and 12 mm inner diameters

The 2.5 mm thickness x 12 mm length screw will fit the following Tribal Dream Rings:

  •  1g (7mm) thickness x 25 mm inner diameter
  • 0g (8mm) thickness x 22 and 25 mm inner diameters
  • 00g (10mm) thickness x 10, 12, 15, 22 and 25 mm inner diameters
  • 12mm thickness x 19 mm inner diameter

The 2.5 mm thickness x 14 mm length screw will fit the following Tribal Dream Ring:

  • 15mm thickness x 10 and 12 mm inner diameters

The 2.5 mm thickness x 16 mm length screw will fit the following Tribal Dream Ring:

  • 15mm thickness x 15 mm inner diameter

These screws are only compatible with the Tribal Dream Ring. 

Tribal Dream Rings can be found here.

THIS IS A LIMITED ITEM! Limited jewelry is usually re-stocked much less frequently and is harder for us to get from the manufacturer. So get it while you can, while it's available!
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard "earring" is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. A big part of this is that some jewelry is made overseas and measured in millimeters. And in the USA jewelry is measured in inches/gauges. So many times jewelry can be anywhere from .5mm to 1mm different.

CONVERSION CHART:
Gauge Millimeter Inch
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
8g 3.2mm 1/8"
6g 4mm 5/32"
4g 5mm 3/16"
2g 6mm 1/4"
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
  26.9mm 1-1/16"
  28.5mm 1-1/8"
  30.1mm 1-3/16"
  31.7mm 1-1/4"
  33.3mm 1-5/16"
  34.9mm 1-3/8"
  36.5mm 1-7/16"
  38.1mm 1-1/2"
  39.6mm 1-9/16"
  41.2mm 1-5/8"
  44.4mm 1-3/4"
  47.6mm 1-7/8"
  51mm 2"
Enlarged example of 1" on ruler
Ruler example