Mon Petit Bijoux Threadless Ends Collection
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Limited Mon Petit Bijoux Threadless Ends Collection
LIMITED
25% OFFSavings: Retail
Qty
Sold as a SINGLE
$ USD
These "little jewels" are made from genuine gemstone exquisitely set in solid 14K gold. These diminutive pieces make a lavish statement.

Threadless ends will fit most of these posts.

These threadless designs are available in solid 14K rose, white, or yellow gold with a stainless steel threadless post.

All measurements are approximate:

  • The Eve end measures 3.6mm tall by 2.7mm wide with a 2mm diamond
  • The Gemini end measures 3.9mm tall by 1.6mm wide and is set with two 1mm diamonds
  • The Mask end measures 2.8mm tall by 3.8mm wide and is set with two 1mm diamonds
  • The Vida end measures 4mm in diameter and is and is set with three 2mm diamonds
  • The Illusion end measures 5.9mm tall by 3mm wide and is set with a 2mm pearl cabochon
  • The Blaze end design measures 5.5mm tall by 6mm wide and is set with a 2mm diamond
  • The Tawapa end measures 6mm tall by 6mm wide and is set with a 1mm diamond
  • The Nightfall end measures 9.5mm tall by 9mm wide and is set with a 5.3mm by 3.5mm Turqouise Cab
  • The Triad end measures 6mm tall by 6.5mm wide and is set with a 2.5mm diamond
  • The Circlet end measures 6.5mm in diameter and is set with a 2mm diamond
  • The Beam end measures 6mm tall by 1.5mm wide and is set with two 1mm diamonds
  • The Arc end measures 5mm tall by 6.6mm wide and is set with a 2mm diamond
  • The Ex end design measures 6.4mm in diameter and is set with four 1mm diamonds
  • The Ringlet end measures 5.5mm in diameter and is set with three 1mm genuine gemstones
  • The Palisade end measures 10mm tall by 1.8mm wide and is set with 1.5mm gemstones
  • The Coven end measures 5mm in diameter and is set with three 1.5mm gemstones
  • The Idol end measures 8mm in diameter and is set with eight 1mm diamonds


More threadless jewelry can be found here.

THIS IS A LIMITED ITEM! Limited jewelry is usually re-stocked much less frequently and is harder for us to get from the manufacturer. So get it while you can, while it's available!
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
Customer Reviews (1)