Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Limited Lotus Petal Carved Wood Saddles
LIMITED
Qty
Sold as a PAIR
$ USD
  • Product # 34464
  • Material(s): WoodSaba
  • Flares: Double flare
  • Worn In: Ear lobe
  • Sizes offered: 1-1/16", 1-1/4", 1-3/8", 1-3/4"
With a delicate petal carving, these wood saddles are perfect for adding some organic beauty to your style.

This design is very light and will not weigh down ears, and is also much more fragile than its metal counterparts.

The below measurements are approximate:

Height and width measurements are taken from edge of the flare.

  • The 9/16" measure 14.3mm tall by 12.6mm wide and have a 6.5mm wearable
  • The 5/8" measure 15.7mm tall by 14mm wide and have a 7mm wearable
  • The 11/16" measure 19mm tall by 17mm wide and have a 8mm wearable
  • The 3/4" measure 20.2mm tall by 19mm wide and have a 7.8mm wearable
  • The 7/8" measure 22.2mm tall by 20.5mm wide and have a 9mm wearable
  • The 7/8" measure 22.2mm tall by 20.5mm wide and have a 9mm wearable

Please note: The listed size for this saddle design is the minimum size required for insertion. They can be worn in lobes larger than the listed size.

Wood should not be worn while swimming or showering.  Wood is reactive to environmental conditions, so both damp or unusually drying circumstances may have an adverse effect on this material. 

PLEASE NOTE: SPECIAL CARE: This item is made with wood. We recommend taking wood jewelry out before showering as water can ruin it.
THIS IS A LIMITED ITEM! Limited jewelry is usually re-stocked much less frequently and is harder for us to get from the manufacturer. So get it while you can, while it's available!
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard "earring" is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. A big part of this is that some jewelry is made overseas and measured in millimeters. And in the USA jewelry is measured in inches/gauges. So many times jewelry can be anywhere from .5mm to 1mm different.

CONVERSION CHART:
Gauge Millimeter Inch
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
8g 3.2mm 1/8"
6g 4mm 5/32"
4g 5mm 3/16"
2g 6mm 1/4"
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
  26.9mm 1-1/16"
  28.5mm 1-1/8"
  30.1mm 1-3/16"
  31.7mm 1-1/4"
  33.3mm 1-5/16"
  34.9mm 1-3/8"
  36.5mm 1-7/16"
  38.1mm 1-1/2"
  39.6mm 1-9/16"
  41.2mm 1-5/8"
  44.4mm 1-3/4"
  47.6mm 1-7/8"
  51mm 2"
Enlarged example of 1" on ruler
Ruler example