Stainless Steel Decadent Saddle Design
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Steel Decadent Saddle Design
Qty
Sold as a PAIR
$ USD
Amplify your style with these stunningly detailed decadent steel saddles!

The below measurements are approximate:

  • All sizes have a 6.5mm wearable area
  • The 00g measures 12.3mm tall by 14mm
  • The 7/16" measures 16mm tall by 17.7mm wide
  • The 9/16" measures 19.5mm tall by 21mm wide
  • The 5/8" measures 23mm tall by 24.8mm wide
  • The 3/4" measures 26.3mm tall by 28mm wide
  • The 7/8" measures 31.4mm tall by 33.7mm wide
  • The 1" measures 36.2mm tall by 38.7mm wide
  • The 1-1/4" measures 41.2mm tall by 44.4mm wide

Please note: The listed size for this saddle design is the minimum size required for insertion, and is accounting for the large back flare. They can be worn in lobes larger than the listed size.

In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
Customer Photos
Similar Products
Customers Also Bought
Customer Reviews (5)
5 Posted on 11/2/2022    by Andrea
Verified purchase 1"  (pair)
GET THEM! They are so much more gorgeous in person! I got tons of compliments my first day wearing them. They're very easy to put in and aren't very heavy or uncomfortable!
Was this review helpful to you?
5 Posted on 9/9/2021    by Denise
Verified purchase 7/16"  (pair)
I adore these! I got them in very easily. They sit beautifully in the lobe and are really eye catching.
Was this review helpful to you?
5 Posted on 5/28/2021    by Sheba
Verified purchase 7/16"  (pair)
comfortable, pretty and easy to insert!
Was this review helpful to you?
5 Posted on 9/11/2020    by Anna
Verified purchase 5/8"  (pair)
I had a slight concern for these fitting in my less-than-cooperative earlobes when I ordered them. When they arrived today and I saw them in person I instantly loved them, but my concern did not diminish. The design flares out wider than the wearable on both sides, but my earlobes happily accepted them and I couldn't be more thrilled. This pair of hangers are gorgeous, extremely comfortable, and I will purchase more as I size up.
Was this review helpful to you?
5 Posted on 7/22/2020    by Richard
Verified purchase 1-1/4"  (pair)
Light weight stainless steel with deep lobe channel so quite secure when worn even with my 38mm/1.5 inch lobe size. Quite thin at about 9mm so can be worn under some slotted ear weights such as the large size T-Wrecks weights I bought years ago from BAF. Quite attractive in my opinion. Wish it was available in larger sizes too.
Was this review helpful to you?
Customer Questions & Answers

Don't see the answer you're looking for? Please log-in to post your question