Account
View Cart / Checkout
Current Filters
Remove all filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Wood Super Spirals
Wood Super Spirals
Main Photo
Qty
Sold as a PAIR
$ USD

All measurements are approximate:

  • The 0g spirals measure 51mm in diameter
  • The 00g spirals measure 59.5mm in diameter
  • The 7/16" spirals measure 61mm in diameter
  • The 13mm spirals measure 61mm in diameter
  • The 9/16" spirals measure 67mm in diameter
  • The 5/8" spirals measure 72mm in diameter
  • The 3/4" spirals measure 77.5mm in diameter
  • The 7/8" and 15/16" spirals measure 84mm in diameter
  • The 26mm spirals measure 84mm in diameter

Bloodwood, also known as Satine, is a sustainable wood harvested in South America.  It gets its name from its vivid red color, although it can darken over time as it is exposed to sunlight or oils.  The grain of bloodwood is usually straight and fine, with a mild chatoyancy.

Dark Raintree, known locally as Mai Pradu, is an easy to work with wood that finishes well.  Related to Amboyna and Narra wood, this wood is dark brown with some minor dark striping.

PLEASE NOTE: This item is crafted from organic material and the gauge can vary +/- up to 0.5mm
SPECIAL CARE: This item is made with wood. We recommend taking wood jewelry out before showering as water can ruin it.
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
0g Bloodwood (pair) - $24.95
0g Dark Raintree (pair) - $24.95
00g/10mm Bloodwood (pair) - $26.95
00g/10mm Dark Raintree (pair) - $26.95
7/16" Dark Raintree (pair) - $29.95
1/2" 13mm Bloodwood (pair) - $31.95
1/2" 13mm Dark Raintree (pair) - $31.95
9/16" Bloodwood (pair) - $33.95
9/16" Dark Raintree (pair) - $33.95
5/8" Bloodwood (pair) - $35.95
5/8" Dark Raintree (pair) - $35.95
3/4" Bloodwood (pair) - $37.95
3/4" Dark Raintree (pair) - $37.95
7/8" Bloodwood (pair) - $39.95
7/8" Dark Raintree (pair) - $39.95
Customers Also Bought
Customer Reviews (1)