Glass Septum Eyelet
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Glass Septum Eyelet
Qty
Sold as a SINGLE
$ USD
12 customers have this in their cart
  • Product # 40314
  • Material(s): GlassPyrex Glass
  • Flares: Double flare
  • Worn In: Ear lobeSeptum
  • Sizes offered: 4g, 2g, 1g, 0g, 00g/9mm, 00g/10mm, 7/16", 1/2"
  • Brand:

All measurements are approximate:

  • The wearable length is going to be 1/4"
  • The flares are .5mm larger than the gauge
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
2g 1/4" - $12.95
00g/9mm 1/4" - $15.95
00g/10mm 1/4" - $17.95
7/16" 1/4" - $17.95
1/2" 1/4" - $20.95
Similar Products
Customers Also Bought
Customer Reviews (4)
5 Posted on 1/6/2023    by Kyrie
Verified purchase 1/2" 1/4" 
Extremely subtle flares, yet just enough to stay put! Got them for my ears since finding shorter wearables seems to be a challenge, and they are an exact fit! For being clear tunnels they are very eye-catching in my lobes and I love it. Couldn't be happier with my purchase.
Was this review helpful to you?
5 Posted on 1/6/2023    by Kyrie
Verified purchase 4g 1/4" 
Bought these for my ears since most tunnels have stupidly long wearables. The dainty flare is amazing for easy insertion at such a small gauge where most double flares can be unmanageably large. I'm completely in love with the absolute perfect length and how they look in my lobes.
Was this review helpful to you?
5 Posted on 5/22/2022    by Antonio
Verified purchase 00g/10mm 1/4" 
Easy to put on for me and hyper comfortable!
Was this review helpful to you?
4 Posted on 5/2/2022    by Matthew
Verified purchase 00g/10mm 1/4" 
Taper was kinda hard to get past
Was this review helpful to you?
Customer Questions & Answers

Don't see the answer you're looking for? Please log-in to post your question