Steel Flame Saddles
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Discontinued Steel Flame Saddles
LAST CHANCE
25% OFFSavings: Original price
Qty
Sold as a PAIR
$ USD

All measurements are approximate:

  • All sizes have a 6mm wearable area
  • The 00g measure 10.6mm tall by 10.2mm wide
  • The 1/2" measure 13.8mm tall by 12.9mm wide
  • The 9/16" measure 17.2mm tall by 15.4mm wide
  • The 5/8" measure 19.7mm tall by 17.8mm wide
  • The 7/8" measure 24.5mm tall by 21.6mm wide
  • The 1" measure 29mm tall by 25.4mm wide
  • The 1-1/8" measure 32.8mm tall by 29.5mm wide

Please note: The listed size for this saddle design is the minimum size required for insertion. They can be worn in lobes larger than the listed size.

In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
Similar Products
Customers Also Bought
Customer Reviews (3)
5 Posted on 12/11/2022    by Grey
Verified purchase 1/2"  Steel (pair)
Look smaller than I expected them to be but that is just me, they are very well made and I like them
Was this review helpful to you?
5 Posted on 3/14/2022    by Mary J
Verified purchase 5/8"  Steel (pair)
Amazing look with the flames! Very nice balanced weight so they don't tip forward! Love them!
Was this review helpful to you?
5 Posted on 3/2/2022    by mew
Verified purchase 5/8"  Steel (pair)
if i could give more stars i would!! currently wearing them now!! i love them so much! the pictures don't do them justice! the color is so vibrant and they look badass!
Was this review helpful to you?
Customer Questions & Answers

Don't see the answer you're looking for? Please log-in to post your question