Silver Rail Clickers | Belly | Eyebrow
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Silver Rail Clickers
Qty
Sold as a SINGLE
$ USD
With a narrow inner diameter, these clickers are made for a snug fit in a shallower piercing, like an eyebrow or navel.

All measurements are approximate:

  • The 5/16" clickers have an inner wearable that measures 9.5mm tall by 4mm wide and the outer dimensions measure 16.4mm tall by 8mm wide
  • The 7/16" clickers have an inner wearable that measures 11.3mm tall by 4.7mm wide and the outer dimensions measure 19mm tall by 8.7mm wide
  • Made from sterling silver or 14k gold PVD plated silver
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
14g 5/16" Rose Gold - $14.95
Similar Products
Customers Also Bought
Customer Reviews (3)
5 Posted on 12/5/2022    by Ne
Verified purchase 14g 7/16" Rose Gold
These are so beautiful, I get compliments on them all the time.
Was this review helpful to you?
5 Posted on 12/5/2022    by Ne
Verified purchase 14g 5/16" Rose Gold
Suuuper cute, I love the look. I could do with an even shorter length though, given that I can wear a 6mm hoop in my navel. Maybe one day.
Was this review helpful to you?
4 Posted on 10/7/2022    by corin
Verified purchase 14g 5/16" Rose Gold
I got 2 of these for my double navel piercing and I love how they look. One doesn't snap as securely as the other and it is prone to pop open without warning. I'm a little worried about losing it all together. The one that snaps tight is perfect though, no issues at all with that one.
Was this review helpful to you?
Customer Questions & Answers

Question: can these be worn in vertical labrets?
Answer: Hi there! Since the lips are a really high movement area, there probably isn't enough wiggle room on the post's wearable area to fit comfortably on most vertical labrets. Due to that I would not recommend this piece for that piercing.

Don't see the answer you're looking for? Please log-in to post your question