Tawapa Double Flare Floral Lotus Eyelets

Lotus Eyelets

Product # 5364
Material(s): Metal, Silver, Ceramic plated, Rose gold plated, Yellow gold plated
Flares: Double flare
Worn In: Ear lobe
Sizes offered: 8g, 6g, 4g, 2g, 0g, 00g/9.5mm, 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1"
Brand:

Artfully designed and crafted, these double flare Lotus eyelets from Tawapa are available in 8g through 1-1/2" and feature a detailed, floral framing.

Available in sterling silver, yellow gold plated silver, rose gold plated silver, or ceramic plated silver (gun metal).

All sizes have an approximate 5/16" wearable area

The below measurements are approximate:

6g has a 5.5mm back flare and a 3/8" diameter lotus front.
4g has a 7mm back flare and a 10mm diameter lotus front.
2g has a 5/16" back flare and a 1/2" diameter lotus front.
0g has a 3/8" back flare and a 9/16" diameter lotus front.
00g has a 7/16" back flare and a 5/8" diameter lotus front.
7/16" has a 1/2" back flare and a 3/4" diameter lotus front.
1/2" has a 9/16" back flare and a 20mm diameter lotus front.
9/16" has a 5/8" back flare and a 15/16" diameter lotus front.
3/4" has a 13/16" back flare and a 1-3/16" diameter lotus front.

In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:

Gauge	Millimeter	Inch
20g	.81mm
18g	1mm
16g	1.2mm	3/64"
14g	1.6mm	1/16"
12g	2mm	5/64"
10g	2.4mm	3/32"
9g	2.7mm
8g	3.2mm	1/8"
7g	3.5mm
6g	4mm	5/32"
4g	5mm	3/16"
5g	4.5mm
2g	6mm	1/4"
1g	7mm
0g	8mm	5/16"
00g	9mm to 10mm	3/8"
	11mm	7/16"
	13mm	1/2"
	14mm	9/16"
	16mm	5/8"
	19mm	3/4"
	22mm	7/8"
	25mm	1"
Show sizes above 1 inch
	26.9mm	1-1/16"
	28.5mm	1-1/8"
	30.1mm	1-3/16"
	31.7mm	1-1/4"
	33.3mm	1-5/16"
	34.9mm	1-3/8"
	36.5mm	1-7/16"
	38.1mm	1-1/2"
	39.6mm	1-9/16"
	41.2mm	1-5/8"
	44.4mm	1-3/4"
	47.6mm	1-7/8"
	51mm	2"

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:

Captive bead rings - These use tension to hold a bead in place.
Clickers - These use a hinge to open and close the ring.
Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
Seamless rings - These rings require bending to open & close.

How to measure rings

Gauge - This is the thickness of the ring itself.
Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.

How to measure straight barbells

Gauge - This is the thickness of the post/bar itself.
Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.

How to measure double flare plugs

Gauge - Measure the size of the plug across the middle.
Wearable area - Measure straight across the side of the plug between where the flares start.
Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.

How to measure single flare plugs

Gauge - Measure the size of the plug across the middle.
Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.

How to measure no flare plugs

Gauge - Measure the size of the plug across the middle.
Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes

How to measure teardrop shaped jewelry

Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
Wearable area - Measure directly across the plug between where the flares begin.
Flare size / rise - Measure from between the flares to the edge of where the flares end.