Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Shirt sizes
Ring sizes
Defaults to contain ANY selected colors
Discontinued Abaraka Hand Carved Wood Designs
Each of these finely carved designs displays a master craftsperson's skill and attention to detail. They are no longer being made so get them while you can!

The below measurements are approximate:

  • For the Vertebrae Blade Spirals: 8g are 2-1/4" tall, 6g and 4g are 2-1/2" tall
  • For the Vertebrae Tail Spirals:  8g are 2" tall
  • For the Serrated Spiral Designs:  8g are 2-1/4" tall
  • For the Serpentine Vertebrae Designs:  6g and 4g are 2-3/16" tall
  • For the Vertebrae Spiral Hooks:  4g are 2" tall
  • For the Fancy Fan Designs:  4g are 2-5/8" tall
  • For the Broken Arc Designs:  8g and 6g are 2" tall
  • For the Plume Designs:  8g and 6g are 2-1/2" tall, and the 4g are 3" tall
  • For the Spinal Spirals:  4g are 2-1/" tall
  • For the Vertebrae Curl Designs:  6g are 2-1/8" tall
  • For the Sprout Spiral Designs:  6g are 2-3/8" tall
  • For the Flourish Design:  4g are 2-1/4" tall
  • For the Drop Spiral Design:  8g and 6g are 2-3/8" tall
  • For the Vertebrae Teardrop Curl:  8g are 2-1/2" tall
  • For the Lavish Design:  8g are 2-3/8" tall
  • For the Corona Design:  8g are 2-3/8" tall
  • For the Fan Spiral:  8g are 2-3/8" tall
  • For the Wave Curl Design:  8g are 2-1/4" tall
  • For the Thicket Design:  8g are 2-1/2" tall
  • For the Cursive Design:  6g are 1-7/8" tall
  • For the Hook Spiral Design:  4g are 2-1/4" tall
  • For the Fetching Design:  6g are 2-3/8" tall
  • For the Cascade Design:  4g are 3-1/4" tall
  • For the Crossover Design:  8g are 2-1/2" tall
  • For the Fan Spiral Hooks:  8g are 2-3/16" tall and 6g are 2-5/16" tall
  • For the Swans Design:  8g are 2-1/2" tall

In addition to the various woods this carver uses, they also make some designs available in Jet.  Jet is a vegan friendly material, a black organic gemstone composed of decomposed plant matter compressed into solid carbon. It is a geological relative of coal, but much younger, and has been used in jewelry for an astounding 10,000 or more years.

PLEASE NOTE: This item is crafted from organic material and the gauge can vary +/- up to 0.5mmSPECIAL CARE: This item is made with wood. We recommend taking wood jewelry out before showering as water can ruin it.
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard "earring" is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. A big part of this is that some jewelry is made overseas and measured in millimeters. And in the USA jewelry is measured in inches/gauges. So many times jewelry can be anywhere from .5mm to 1mm different.

Gauge Millimeter Inch
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
8g 3.2mm 1/8"
6g 4mm 5/32"
4g 5mm 3/16"
2g 6mm 1/4"
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
  26.9mm 1-1/16"
  28.5mm 1-1/8"
  30.1mm 1-3/16"
  31.7mm 1-1/4"
  33.3mm 1-5/16"
  34.9mm 1-3/8"
  36.5mm 1-7/16"
  38.1mm 1-1/2"
  39.6mm 1-9/16"
  41.2mm 1-5/8"
  44.4mm 1-3/4"
  47.6mm 1-7/8"
  51mm 2"
Enlarged example of 1" on ruler
Ruler example
Customer Photos
Customer Reviews (27)
4.7 out of 5 stars
83% (5)
17% (1)