How to Use Labret Tweezers

Hey there! Have you ever struggled with getting your threadless labret jewelry out? You're not alone. At first, we weren't sure how useful labret tweezers would be, but they’ve turned out to be a real game-changer!

In this guide, we'll show you how to use labret tweezers effectively. So, let’s dive right in and make this process easy and painless!

What Are Labret Tweezers?

Labret tweezers are special tools designed to help you remove and insert labret jewelry with ease. They have a unique shape that allows you to grip the jewelry securely without slipping.

Why Use Labret Tweezers?

• Secure Grip: They provide a firm hold on small jewelry pieces.
• Easy Removal: Makes removing threadless labrets from tricky spots, like nostrils, a breeze.
• Less Pain: Helps you avoid unnecessary discomfort during the process.

Step-by-Step Guide on Using Labret Tweezers

Step 1: Gather Your Tools

Make sure you have your labret tweezers and a clean, well-lit area to work in. Cleanliness is crucial to avoid infections.

Step 2: Clean Your Hands and Tweezers

Wash your hands thoroughly with soap and water. Also, clean your labret tweezers with rubbing alcohol or antibacterial soap.

Step 3: Locate the Jewelry

Identify the labret jewelry you want to remove. Make sure you can see it clearly and have easy access to it.

Step 4: Use the Tweezers

Gently grip the labret jewelry with the tweezers. Make sure you have a firm hold without squeezing too hard. Slowly pull the threadless end out in a straight motion.

Step 5: Clean the Area

Once the jewelry is removed, clean the area with a saline solution. If you’re putting in new jewelry, make sure it's also clean and insert it using the tweezers for precision.

 

 

And that's it! You've successfully used labret tweezers to remove your jewelry. Easy, right?

 

How to Use a Threaded End Removal Tool

Hey there! Today, I'm going to walk you through the process of changing bridge jewelry using a threaded end removal tool. If you've ever struggled with removing threaded jewelry, this tool will make your life so much easier!

What Is a Threaded End Removal Tool?

A threaded end removal tool is designed to help you remove threaded jewelry with ease. It's especially useful for hard-to-reach places or tight threads that are difficult to unscrew by hand.

Why Use a Threaded End Removal Tool?

• Easy to Use: Simplifies the process of removing threaded jewelry.
• Reduces Pain: Minimizes discomfort during jewelry removal.
• Prevents Damage: Helps avoid damaging the jewelry or your skin.

Step-by-Step Guide on Using a Threaded End Removal Tool

Step 1: Gather Your Tools

You'll need your threaded end removal tool and a clean area to work in. Make sure you have good lighting and a mirror if needed.

Step 2: Clean Your Hands and Tool

Wash your hands thoroughly with soap and water. Clean the threaded end removal tool with rubbing alcohol or antibacterial soap.

Step 3: Locate the Jewelry

Identify the piece of jewelry you want to remove. Ensure you can see it clearly and have easy access to it.

Step 4: Use the Tool

Gently insert the threaded end removal tool into the end of the jewelry. Turn the tool slowly to unscrew the threaded end. Be patient and avoid using excessive force.

Step 5: Remove the Jewelry

Once the threaded end is loose, carefully remove the jewelry. If you're changing to new jewelry, make sure it's clean and screw it in place using the tool for a secure fit.

 

And that's it! You've successfully used a threaded end removal tool to change your jewelry. It's pretty simple once you get the hang of it!

 

 

How to Use A Hemostat Tool

Hey everyone! Have you ever wondered what those locking pliers with ridges are called? They're called hemostats, and they can be super handy when it comes to switching out your jewelry. In this guide, I’ll show you exactly how to use a hemostat tool and why they’re so helpful.

What Are Hemostats?

Hemostats are a type of locking pliers that have ridges allowing them to lock into place. They are designed to grip small objects securely, making them perfect for handling jewelry, especially in tricky areas.

Why Use a Hemostat Tool?

• Secure Grip: They provide a strong hold on jewelry, making it easier to insert or remove pieces.
• Precision: Helps you work with jewelry in hard-to-reach spots.
• Versatility: Can hold a post while you thread or push in the end.

Step-by-Step Guide on Using a Hemostat Tool

Step 1: Gather Your Tools

Make sure you have your hemostat and a clean, well-lit workspace. Good lighting is essential for seeing what you're doing clearly.

Step 2: Clean Your Hands and Tool

Wash your hands thoroughly with soap and water. Clean the hemostat with rubbing alcohol or antibacterial soap.

Step 3: Grip the Jewelry

Gently open the hemostat and position them around the piece of jewelry you want to grip. Lock them into place by closing them until you hear a click. Be careful not to squeeze too hard to avoid damaging your jewelry.

Step 4: Insert or Remove the Jewelry

With the jewelry securely held by the hemostat, you can easily insert or remove it from the piercing. Use your free hand to assist with threading or pushing the end onto the post.

Step 5: Release the Hemostat Tool

To release the jewelry, gently open the hemostat by squeezing the handles and unlocking them. Be careful with your grip to avoid dropping the jewelry.

 

 

And there you have it! Using a hemostat can make changing your jewelry a breeze, especially in those hard-to-reach spots.

 

How to Use Captive Ring Opening Pliers

Struggling with inserting the bead OR removing the bead in a captive ring? Ring opening pliers are a lifesaver! We will show you how to use ring opening pliers to make life easier when trying to insert and remove beads.

Prepare your area first

Beads and segments can be very small, and the last thing you want to have happen is to lose them. It's best to work over a sink, however, take a couple of precautions first:

• Be sure to always close the drain first.
• It also can help to lay a paper towel over the drain so if you do drop your bead it doesn't bounce all over the place or out of the sink.

How to use a ring opening plier

Ring opening pliers come in a few different sizes. If you're working with tiny rings that are also small in gauge (18g, 16g, 12g) then getting a mini ring opening plier will probably be the easiest to use. The heavier the gauge of the ring, the larger the plier you will need. This is because you need leverage to be able to open up the ring and a small plier will not work well for large heavy gauge rings.

One thing to also note, is that you never want to apply large amounts of pressure when doing this. If you open a ring too much, it won't go back to its normal state. And that point you'll have to use a ring closing plier to help close it back.

To insert a bead into the ring:

• While holding the plier in one hand, place the ring into the notches of the plier and slowly open up the plier to where there is just enough tension to hold the ring in place without opening it up yet.
• Line up one dimple (or segment end) into one end of the ring.
• Slowly grip the pliers to apply tension to the ring. The ring will slowly open. As it is opening align the other side of the beads dimple to the other side of the ring.
• As soon as the dimples are aligned on both sides, you can release the plier and the bead should now hold securely in place.

To remove a bead from the ring:

• Insert the ring into the notches of the plier and apply enough tension for it to hold the ring (don't open it yet).

• With your other hand, grab the bead.
• While you are continuing to hold the bead, slowly apply pressure to the plier to slowly open up the ring and as soon as you feel the bead being loosened you can remove it and release the tension from the plier.

 

 

How to Use Threaded and Threadless Tapers to Insert Jewelry

Having trouble inserting your jewelry into that tricky nostril or lip piercing? Today we're gonna talk about how you can use threaded and threadless tapers to get that finicky jewelry back in!

Here's How to Use Thredless or Threaded Tapers

To start off, you’re going to want a taper with a threaded or threadless design that matches the jewelry you need inserted. If you have internally threaded jewelry, you will need a threaded taper in the corresponding gauge size, and threadless jewelry will require a threadless taper.

• Make sure your piercing is fully healed and that your piercing, hands, taper, and jewelry are all clean. If you need, you can also use a bit of salve on your piercing and on the taper to reduce friction and ease insertion, though this isn’t recommended for lip or other oral piercings.
  
  
• Once prepped, take your taper, and gently slide it through your piercing. Be mindful of which direction your jewelry will face, and make sure the threaded or threadless end of the taper is on the correct side.
  
  

• With the taper inserted, take your jewelry and attach it to the threaded or threadless end. If working with a threadless taper, you may need to bend the pin ever so slightly so that it can hold the jewelry. Make sure it’s not too tight - you just need it to have enough tension to stay attached.
  
  
• Now, gently pull the taper back through your piercing, using one finger behind the jewelry to guide it through as well. Once the jewelry is in place, remove the taper and attach the threaded or threadless end of your choice.

And you’re done!

 

 

Easy Nostril Jewelry Removal: Threadless Ends String Hack

We often receive questions about how to remove a threadless end. Also known as a flat back stud or push pin stud, threadless ends are really popular. Sometimes, the tension on a threadless end has been adjusted too high, and it can be difficult to remove safely. For a quick guide on adjusting the tension of your threadless ends, check out this (very) short video.

While there are tools to help with this, we find a simple piece of dental floss or other tough thread does the trick almost every time. In fact, we tested some of the most commonly used tools in the industry, and this method smoked them all. So this is a true hack that can save you a lot of pain.

Today, we will introduce you to a simple and effective technique called the "string hack" for easily taking out your threadless jewelry. Follow the step-by-step instructions below to master this handy trick. The jewelry in this video is a labret post, with a threadless end, but this hack will work with a variety of: flat back earrings, threadless push pin style jewelry, threadless body jewelry and other popular styles. It is not suitable for fixed bead rings or seam rings, which require a different method to remove.

The String Hack: Step-by-Step Guide

• Wash your hands. Always a great start, even if your piercing is fully healed. This is the step most people forget, but it's important. Your piercing may be swollen, irritated and inflamed already if you're struggling to get your jewelry out. Having clean hands will reduce the risk of infection.
• Start by cutting two pieces of floss, each long enough to form a loop. Take your time here and get a good sized loop. Having a bit more floss than you need will make this process a lot smoother. And just like when you floss, don't forget that you'll need enough thread to actually hold on to, without your fingers slipping.
• Gently push the jewelry downwards and flip your nostril outward, exposing the post. If you're removing an ear piercing, flip your lobe or helix forward so you can see the labret post in the back. This method also works with threadless barbells, so if you have a barbell back instead of a flatback labret, you'll still be good to go.
• Take one piece of floss and create a loop by tying it securely around the exposed post. It can be handy to have a loop ready made by tying it in a small, slip knot configuration. A simple left-over-right knot will do it, also known as a 'granny knot'. Having this ready to go in advance makes this a lot easier. Don't forget, you'll be holding the jewelry out with one hand and closing the loop with the other! This process is easier if you have a buddy to help get those loops tightened. Don't use a buddy later for the pulling part though. You want to make sure that you can feel how much pressure you're using. The one exception is if your buddy is a professional piercer. Then they can take the wheel.

• Tie the other piece of floss around the top of the stud, or threadless end. Make sure it's tightly secured. You'll be giving it a gentle pull, so having it secure is super important. If the floss slips, there's a chance you'll be in a some pain as your piercing gets tugged on. Don't worry, though. The most important part is to be gentle in the next step.

• Once both pieces of floss are securely tied, gently pull them in opposite directions. Remember that pro-tip from step 5 about being super gentle? That's the name of the game. When the labret post comes loose, it'll probably be in one smooth motion. Try to put the most pressure on the loop attached to the threadless end, and think of the loop around the labret post inside your ear or nostril as support for the other loop. It allows you to pull, without tugging the labret.
• With a gentle tug, the threadless end should pop right out. This shouldn't feel like you're opening a tough bag of chips! If you find yourself really straining as you pull, take a step back and make sure everything is right. A threadless end, even if it's too tight, should slide free easily using this method. If it doesn't, it's possible that you have a threaded end in. This method won't work for those, since they screw in.

By using this string hack method, you can easily and safely remove your threadless jewelry without any hassle. It's a convenient technique that can be used for various piercings, including nostril piercings, earlobe piercings, and cartilage piercings.

 

Removing threadless ends doesn't have to be a daunting task. With the string hack technique, you can confidently and effortlessly remove your jewelry when you need to. Remember to be gentle and take your time during the process. If you're unsure or uncomfortable, it's always best to seek assistance from a professional piercer. Now you can enjoy the flexibility and convenience of switching out your threadless ends with ease!

Feeling a bit raw after your jewelry got stuck? We don't blame you. Your poor piercing probably went through a lot! Check out our Aftercare supplies for salves and oils to sooth an inflamed piercing.

 

 

How Do You Use a Piercer End Grabber Tool?

If you’ve ever struggled to hold onto tiny threaded ends or jewelry pieces while changing your piercings, you’re definitely not alone. That’s where a piercer end grabber tool (also called a claw grabber) comes in handy. It’s a small but super useful tool that makes handling small jewelry parts way easier.

 

What Is a Piercer End Grabber Tool?

A piercer end grabber tool looks a bit like a pen with a small claw at the tip. When you press the top plunger, the claw opens up, allowing you to grab tiny jewelry ends, beads, or balls. Once you release the plunger, the claw tightens and securely holds whatever you’ve grabbed.

 

How to Use It

Using this tool is simple, but a few small tricks can make it even easier:

• Step 1: Press down on the plunger to open the claw.

• Step 2: Gently position the claw around the jewelry end or bead you want to pick up.

• Step 3: Release the plunger slowly to let the claw close and grip the piece.

• Step 4: Use the tool to set the bead, ball, or threaded end in place.

The grabber tool is great for steadying small parts while you’re lining things up. However, once your jewelry is in place, you’ll usually need to use your fingers to finish tightening everything so it’s snug and secure.

 

Tips for Best Use

• If your jewelry end is really small, it might sit a little loose in the claw. Take your time and adjust your grip as needed.
• Don’t force the tool—gentle pressure is enough to hold most jewelry ends.
• Use it on a clean, flat surface so if something slips, you can easily find it.

 

 

Once you get used to it, this little tool can save you a lot of frustration and keep your jewelry from rolling away mid-change.

SHOP OUR TOOLS HERE

Please remember to follow us on all our socials @Bodyartforms!