Titanium D Shape Nose Ring
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Titanium D Shape Nose Ring
(4.4)
Qty
Sold as a SINGLE
$ USD
50+ customers have this in their cart

Black, rose gold, and gold are PVD plated colors on top of a titanium ring.

These nose rings are hand bent, so they can vary in size slightly.

All measurements are approximate:

  • Discs are 2mm
  • Bar length is 5/32" on the 1/4" diameters
  • Bar length is 1/4" on the 5/16" diameters
  • Bar length is 5/16" on the 10mm diameter
In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
Customer Photos
Similar Products
Customers Also Bought
Customer Reviews (18)
4.4 out of 5 stars
80% (16)
10% (2)
10% (2)
5 Posted on 1/5/2023    by Nik
Verified purchase 18g 5/16" Black
I got tired of losing my nose screws so I gave these a go for my double nostril piercings. Looks incredible with my 10g septum CBR, also in black. They are quite fiddly to get in, but once in feel very secure. It took about a day to get used to the feeling of wearing them, now I absolutely love these rings and think my nose looks extra awesome with them. Thanks BAF :)
Was this review helpful to you?
5 Posted on 10/17/2022    by totes
Verified purchase 18g 5/16" High polish
If you're having problems getting it in I recommend bending it open a bit like you would a seamless ring to make it wider! Once it's in, it's super comfy unlike regular hoops!
Was this review helpful to you?
5 Posted on 9/27/2022    by Nicole
Verified purchase 18g 5/16" High polish
These are sooo much better than any other style of nose ring - easy to put in, but stays put and secure, as well it doesn't irritate the piercing hole since it's a straight bar
Was this review helpful to you?
5 Posted on 6/12/2022
Verified purchase 20g 10mm Gold
So cute. It was difficult to put in my nostril piercing, but once I got it in it was very comfortable. I love that I can switch back and forth between studs and a hoop now without irritating my piercing each time since this post is straight.
Was this review helpful to you?
5 Posted on 5/19/2022
Verified purchase 20g 5/16" High polish
It was easy to put in but it did make my nose bleed a little I think I shoved it in too hard, so put it in slowly. I thought that it would be too small for my nose but it was the perfect size. I have sensitive skin so I can only wear titanium, so far no irritation at all 👍❤️
Was this review helpful to you?
Customer Questions & Answers

Question: How am I supposed to get this in.
Answer: Hey there, I'm happy to answer this for you! To insert a D shaped nose ring, you twist it to open it, insert it and then twist it back to "close" it. I would recommend wearing nitrile or rubber gloves to get a better grip.

Don't see the answer you're looking for? Please log-in to post your question