Stainless Steel Tribal Dream Ring | Seamless
Advanced search & filters
Current Filters
More Filters:
Body Jewelry
Regular Jewelry
Other
Shirt sizes
Ring sizes
Ear
Nose
Other
Face
Genital
Defaults to contain ANY selected colors
Tribal Dream Ring
(4.6)
Qty
Sold as a SINGLE
$ USD
11 customers have this in their cart
Sturdy and reliable, these tribal dream rings are made from sleek stainless steel and secured with a screw mechanism.

These are two halves of a ring held in place by a phillips head screw. You'll need a small screwdriver to take this piece on/off.

Replacement screws for the Tribal Dream Rings can be found here.

In our drop-down menus for adding to cart, we show the gauge of the item you are ordering, then the length/diameter, then the ball size if it has any:

Jewelry is measured through a gauge system (conversion chart below). The higher the gauge number the smaller the wire is. For reference, a standard "earring" is usually 20 gauge. Jewelry gauges can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. This is because some jewelry is made outside of the USA and measured in millimeters. And in the USA jewelry is measured in inches.

GAUGE CONVERSION CHART:
Gauge Millimeter Inch
20g .81mm
18g 1mm
16g 1.2mm 3/64"
14g 1.6mm 1/16"
12g 2mm 5/64"
10g 2.4mm 3/32"
9g 2.7mm
8g 3.2mm 1/8"
7g 3.5mm
6g 4mm 5/32"
4g 5mm 3/16"
5g 4.5mm
2g 6mm 1/4"
1g 7mm
0g 8mm 5/16"
00g 9mm to 10mm 3/8"
  11mm 7/16"
  13mm 1/2"
  14mm 9/16"
  16mm 5/8"
  19mm 3/4"
  22mm 7/8"
  25mm 1"
Show sizes above 1 inch

Rings

Rings are an essential item that can be worn in many piercings. They come in various styles:
  • Captive bead rings - These use tension to hold a bead in place.
  • Clickers - These use a hinge to open and close the ring.
  • Segment rings - These have a "segment" that comes completely out of the jewelry similar to removing a bead. But it looks like a completely seamless piece of jewelry.
  • Seamless rings - These rings require bending to open & close.
How to measure rings
  • Gauge - This is the thickness of the ring itself.
  • Diameter/Length - Measure directly across the inside center of the ring.

Straight Barbells

Straight barbells are commonly worn in various ear projects, nipples, and tongue piercings.
How to measure straight barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Double Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure double flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where the flares start.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends.

Single Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure single flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between where one flare starts and where the o-ring starts.
  • Flare size / rise - Measure the distance from the side of the plug to where the flare ends. (see image of double flare plugs)

No Flare Plugs / Eyelets / Gauges

Commonly worn in earlobes, but can be worn in other stretched piercings.
How to measure no flare plugs
  • Gauge - Measure the size of the plug across the middle.
  • Wearable area - Measure straight across the side of the plug between the o-rings.

Teardrop Shaped Plugs

Worn in earlobes
How to measure teardrop shaped jewelry
  • Gauge - Add the height + width and then divide by 2. Then use the conversion chart to get the closest gauge.
  • Wearable area - Measure directly across the plug between where the flares begin.
  • Flare size / rise - Measure from between the flares to the edge of where the flares end.

Curved Barbells

Curved barbells are commonly worn in various ear projects & eyebrows.
How to measure curved barbells
  • Gauge - This is the thickness of the post/bar itself.
  • Length - Measure directly across the post between the ends.

Circular Barbells

Circular barbells are commonly worn in various ear projects, septums, nipples, and lips.
How to measure circular barbells
  • Gauge - This is the thickness of the post itself.
  • Diameter/Length - Measure directly across the inside center of the circular.
JEWELRY THREADING TYPES

Externally threaded

Internally threaded

Threadless
SIZE COMPARISON GUIDES
Enlarged example of 1" on ruler
Ruler example
2g 3/4" - $41.95
1g 10mm - $44.95
1g 12mm - $44.95
1g 3/4" - $44.95
0g 10mm - $49.95
00g/10mm 12mm - $61.95
15mm 15mm - $85.95
Customer Photos
Similar Products
Customers Also Bought
Customer Reviews (29)
4.6 out of 5 stars
83% (19)
4% (1)
4% (1)
4% (1)
4% (1)
5 Posted on 1/13/2023    by Allison
Verified purchase 2g 10mm 
It is what it is.
Was this review helpful to you?
5 Posted on 6/16/2022    by Indira
Verified purchase 2g 10mm 
This review is coming after a year of regular wear. Easily the best 40 something dollars I've ever spent. This piece of jewelry is perfect and it still looks great, easy to take care of and perfect to put in and forget about. Also literally outshines all my other silver jewelry, even after a year. You WILL need to have a little baby screwdriver of your own to unscrew this, heads up. It's never once come loose and it's easy to put in after you're familiar with it. *muah* PERFECT!
Was this review helpful to you?
5 Posted on 6/8/2021    by Tomas
Verified purchase 0g 10mm 
Excellent piece - the finish on these is flawless, akin to premium brands. It's not a cheap piece, but will last years. I wear this in my septum and at the moment struggle with the weight of it - it's 25 grams which is a lot in your septum but I'm hoping I'll get used to it in time.
Was this review helpful to you?
4 Posted on 6/8/2021    by Duane
Verified purchase 0g 12mm 
Measured 7.9mm, smooth and shiny except for the screw hole opening, will need the sharp edges buffed down. Maybe too heavy for daily wear, good for a show/going out piece. Dirty with machining oil, needed a deep clean before sterilization.
Was this review helpful to you?
5 Posted on 6/1/2021    by frank
Verified purchase 2g 10mm 
This is the best item I've ever use for a stretched septum piecing. 5 stars. Comfortable and sleek
Was this review helpful to you?
Customer Questions & Answers

Don't see the answer you're looking for? Please log-in to post your question